Unprepared

Tape and Roller

After testing and re-testing various paint systems to find the best, without the need for preparation, we can offer this budget product.

Popular with facilities that do not need highly durable solutions, or whose budget is restricted, or more often than not, where the customer is not permitted to prepare the concrete floor in anyway due to leasing conditions and agreements.

The term ‘Unprepared’ relates to work done to the concrete prior to applying a paint system. It is not strictly accurate however, since we clean the surface thoroughly. The actual concrete is not altered in any way as it would be if using shot blasting or diamond shaving.

Sprayed

Sprayed floor marking is most often used in facilities that store in block stacking configurations where products are placed on the floor in lanes or in zones rather than on racking.

Our method of spraying concrete floors is more advanced than the type of floor spray which can be purchased from catalogue suppliers in aerosol cans, due to the paint and machine.

Using specialist machinery and similar paint to that used in our tape and roller option, the spray machine applies floor marking in the fastest way possible. This is very important when access time is restricted.

Internal Line Marking Recommended Paint & Curing Times In Hours
  Temperature in Degrees Celcius Line Marking Materials
  0 to 33 to 55 to 1010 to 2020 to 30
PreperationPaint TypeHrs
UnpreparedWater/Solvent Based High Build AcrylicN/A2222
Shot BlastPolyaspartic33322
Shot Blast / Diamond Shaved2 Part High Build Epoxy Resins362412 to 1812 to 1812
Timings based upon manufacturers recommendations and can be subject to site variations

 

INTERNAL LINE MARKING CURING TIMES IN HOURS
  Temperature Limit in Degrees Celcius Line Marking Materials
 0 to -200 to 33 to 55 to 1010 to 2020 to 30
Shot Blast / Diamond Shaving 2 Part High Build Epoxy ResinsN/A36*30*24*1812
Unprepared Water Base High Build AcrylicN/AN/A2222
Shot Blast Full UVINSTANTINSTANTINSTANTINSTANTINSTANTINSTANT
Shot Blast PolyasparticN/A54433
Timings based upon manufacturers recommendations and can be subject to site variations
Where line marking is installed in Freezer conditions the floor slab temperature must be taken into account and curing times may increase. *Cold Cure Added

Line Marking Selector

Gallery:

Tape Roller
Sprayed

Connect with us

@ASGServicesUK

Open chat
Hello
Can we help you?