Back to Steel Partitioning

Major Single Skin Partitioning

Major Single Skin Partitioning
The major single skin partitioning system is an ideal solution when a high quality, economical partitioning system is required for manufacturing and storage areas.

Specification:

Major single skin partitioning panels are constructed from 43 x 43 x 1.2 mm (18g) cold rolled angles and 32 x 32 x 0.7mm (22g) cold rolled tee bars with 0.8mm (21g) CR4 mild steel or 50 x 50 x 3mm (10g) weldmesh sheets spot welded into the framework.

Standard panel sizes

Height: 2400, 2700, 3000 mm Width: 1000 mm Dado Height: 1200 mm Thickness: 43 mm A range of infill and special size panels can be supplied to maintain final dimensions.

Standard door module sizes: steel or timber

Side Hung Doors: height 2022 mm width 1000 mm* Double Doors: height 2022 mm width 1940 mm* Sliding Doors: to suit customer’s requirements *Plus overpanel to partition height Doors can be supplied with or without vision panels. A full range of non-standard door types, i.e. full height leaves, or clear access modules are available to order.

Glazing

A two-piece glazing system that can accommodate 4 mm to 6.4 mm glass, is supplied in 1828 mm and 2440 mm lengths to be cut and fitted on site. 6 mm toughened, 6.4 mm laminated and 6 mm Pyroshield are supplied as standard. However, other types of glass and Perspex may also be fitted as required.

Paint finish

All panels are electrostatically powder-coated in the following standard colours: Grey 10 A 07, Grey 00 A 05, Sandstone 08 B 17 and Stone 10 B 17. Special colours (more than 100 in stock) are available at extra cost.

Accessories

A comprehensive range of accessories, including drop-down and sliding hatches, louvres, vents and locking systems are available to order.

Gallery:

Major Single Skin Partitioning

Connect with us

@ASGServicesUK

Open chat
Hello
Can we help you?