Back to Rack Protection

Steel Rack Protectors

Steel Rack Protectors

There are a number of column protector designs available to ensure the customer is not restricted in their pursuit to improve warehouse safety.

The corner guard rack protector is a universal product designed to be installed on the ends of pallet racking aisles to protect the upright column from damage.

Manufactured from 5mm thick mild steel, the protector should be positioned close to the upright with a void between to allow for impact movement.

Supplied in a yellow finish 1021. Measurements: 450mm high x 144mm x 144mm.

A narrow aisle rack protector designed to prevent damage being caused to racking uprights. This unit stands at 400mm high. Internal guard dimension 125mm suitable for racking up to 100mm wide. Designed to straddle pallet racking base plates.

Available in yellow for immediate delivery. For other colours please call for details.

400mm Height
250mm Deep (at base)
250mm Wide (at base)
125mm Clear Internal Width
5mm Sheet Steel
15mm Holes

A rack protector designed to prevent damage being caused to racking uprights. This unit stands at 400mm high. Internal guard dimension 125mm suitable for racking up to 100mm wide.

Rack column protection units should be a significant consideration for the protection of racking uprights which are susceptible to damage. They should be seen as a beneficial addition even where sacrificial leg sections are utilised on uprights. The rack protection is recommended to prevent damage because it helps improve warehouse safety. (use on frames upto 100 mm wide!)

They are manufactured from 3.5mm thick high tensile steel to protect to a height of 400mm. Positioned 40mm in front of the racking upright, the notched column protector takes the majority of impacting force, protecting the upright from damage and any potential collapse situations or redundant locations.

Gallery:

Steel Rack Protectors
Steel Rack Protectors
Steel Rack Protectors

Connect with us

@ASGServicesUK

Open chat
Hello
Can we help you?